Skip to main content

Blackberry 9700 Mmc Jumper Solution

Blackberry 9700 Mmc Jumper Solution
BB 9700 Memory Card Ways Repair
Blackberry 9700 Memory Card Not Working Problem
This solution covers for hardware level of repair for Blackberry 9700 Memory Card Problem and Also you will find Blackberry 9700 Memory Card Ways and Jumpers information in the diagrams further in this article.
Problem
Memory Card not found.
Not able to store data in MMC.
MMC not accessible.
Not able to read MMC.
Manual Solution
Remove and reinsert memory card and check.
Go into settings and check memory card status.
Check with any other good memory card and check.
Scan memory card for viruses from your PC and check.
Verify proper action of memory card slot spring, as if it is damaged then your phone won’t read your memory card. In this case replace entire Memory card assembly.
If everything else fails then format your memory card.
Hardware Solution for BB9700 Memory card problem
Pull up Bb 9700 memory card circuit contacts with the help of a pin to ensure that memory card socket contacts connect with memory card’s contacts.
Re-solder all the pins of memory card slot.
Re-solder on-board connector of MMC Card and check.
Blackberry-9700-Memory-Card-problem-Solution
Check above mentioned Memory card track ways. If you find any problem or broken any ways then apply jumper.

Comments

Popular posts from this blog

How to Reset Your BIOS

How to Reset Your BIOS Have you recently made a change to your computer's hardware and need to reset your BIOS? Are you locked out of a computer that you purchased secondhand because of an unknown BIOS password? If so, you'll need to reset your BIOS to factory settings. Depending on what you have access to, you can reset the BIOS from within the BIOS menu itself, reset the jumper on your motherboard, or remove and reinsert the CMOS battery that powers the BIOS memory. Method 1 of 3: Resetting from Within BIOS 1. Access your BIOS. Turn on your computer and press the key on your keyboard to enter the BIOS. This is typically the Del (delete) key. Pre-built systems from major manufacturers may use a function key such as F1, F2, or F10. ...

Nokia 5130 pcb layout diagram

Nokia 5130 pcb layout diagram     

Nokia 1202 1661 display solution

Nokia 1202 1661 display solution